Laying and handling guide

LAN data cables: laying and handling

Balanced copper data cables, Category 5e to 7A (TIA-568, EN 50288).

Every line names every source that states it and how it was seen; where sources disagree, each value is shown with its source. IEC, EN and HD documents and makers come first, national rules after them with their country.

Laying temperature and pre-warming

  • Many Cat 6 datasheets give 0 °C as the lowest installation temperature, others -10 °C: a product value, not a TIA-568 one.Sources: TIA-568 (Panduit) (secondary source)

Laying in winter? Pro checks your town and month against this limit. See Pro

Bending radius

  • TIA-568: 4 times the outer diameter for a 4-pair UTP cable without pulling tension; makers give more under tension.Sources: TIA-568 (Panduit) (secondary source)

Pulling force and method

  • TIA-568: At most 110 N (25 lbf) on a 4-pair Cat 5e or Cat 6 horizontal cable.Sources: TIA-568 (Panduit) (secondary source)

Work out the pull for your route: the verdict is free, the numbers and the PDF come with Pro. Pull calculation in the cable designer · See Pro

Depth, cover and laying

Not found in the research for this family.

Drum handling

Not found in the research for this family.

Sheath test after laying

No sheath test after laying was found for this family.

In the cable designer

Cable codes of this family

Terms on this page

Sources

Values as the sources print them. For a given job the cable's own standard, the maker's datasheet and the country's rules decide.

Other cable families