SER 1/0-1/0-1/0-2 AL 600 V

Nominal calculation, not one manufacturer's datasheet. The conductors are compact aluminium as Southwire prints them; the XHHW-2 walls, the jacket and the ground are the values the makers print, because UL 854 was not read. Seven makers' cables of the same name differ by up to 20 % in diameter: check the datasheet before you specify or order.

By NEC Table 8 and the catalogued walls, SER 1/0-1/0-1/0-2 AL 600 V comes to an overall diameter of about 27.6 mm and a weight of about 770 kg/km.

Open this cable in the designer Change any layer, see it in 3D and to scale, and download it.

This size as a PDF datasheet under your brand, with Pro. See Pro

Request a quote for this cable Sent to makers of this cable family, free.

Main dimensions

ConductorAluminium 1/0 AWG (53.5 mm²), Ø 8.5 mmcompact Class B aluminium AA-8000: Southwire SPEC 10015 Table 1 and 3, SPEC 45007 (ASTM B800 / B801)
InsulationXLPE 1.40 mmSER conductor XLPE insulation: the XHHW-2 band of its size (Southwire SPEC 10040 / 10041; UL 854 not read)
Diameter over insulation11.3 mm
Core diameter11.3 mm
Overall diameter27.6 mm
Weight (approximate)770 kg/km

Layer by layer (inside out)

#LayerMaterialThickness mmØ over mmSourceHow firmly
1InsulationXLPE1.4011.3 (on each core)SER conductor XLPE insulation: the XHHW-2 band of its size (Southwire SPEC 10040 / 10041; UL 854 not read)maker catalogue value, standard text not read
2Separation tapePolyester0.1026.0typical polyester tapetypical value, no rule
3SheathPVC0.7627.6SER PVC jacket 30 mil: Southwire SPEC 10040 / 10041, no other maker prints it (UL 854 not read)maker catalogue value, standard text not read

SER is the UL 854 service entrance cable of NEC Article 338: two, three or four XHHW-2 conductors of one size and a smaller bare ground cabled round, no fillers, a binder tape and a gray PVC jacket. Aluminium AA-8000, compact stranded. Checked against Southwire, Encore, Priority Wire, Cerrowire, Houston Wire & Cable and Nassau: research/designer-americas/ser.md in the site repository.

Materials in this cable: Aluminium, XLPE, PVC

Weight, by part

Conductors550 kg/km
Metal screens and armour0 kg/km
Insulation, semicon, tapes, fillers and sheaths230 kg/km
Total770 kg/km

Each layer's cross-section times its density; stranded conductors, laid-up cores and helical wires count 2 % longer than the cable. Densities: copper 8.89 and aluminium 2.703 g/cm³ (the values of IEC 60028 and IEC 60889); XLPE 0.92, PE 0.94, PVC 1.45, semicon 1.12, steel 7.85 g/cm³ (usual compound values).

Who makes or stocks this cable?

SER

Other sections