NYM-JZ

NYM-JZ, DIN VDE tip adları (Almanya) kodlama sistemine göre okunan bir kablo kodudur: N = German national (VDE) type; Y = PVC insulation TI1 (DIN VDE 0281-1): 0,6 mm at 1,5 mm², 0,7 at 2,5, 0,8 at 4 and 6, 1,0 at 10 and 16, 1,2 at 25 and 35 mm² (DIN VDE 0250-204 Table 1); M = Sheath of PVC TM1 (DIN VDE 0281-1), 1,4 to 1,8 mm, over a common covering that fills the gaps, 0,4 to 1,2 mm (a guide value; none on a single core) (DIN VDE 0250-204 5.6, 5.7, Table 1); NYM = NYM: PVC installation cable (Mantelleitung) for fixed installation, the type of DIN VDE 0250-204. U0/U 300/500 V (clause 4); laying after DIN VDE 0298-3 (clause 7). DIN VDE 0250-204:2000-12 (1 core 1,5 to 16 mm², 2 to 5 cores 1,5 to 35 mm², 7 cores 1,5 and 2,5 mm², 5.1; bare copper, solid class 1 to 10 mm², stranded class 2 from 16 mm², 5.2; mean overall diameter limits, Table 1 columns 7 and 8, e.g. 3 x 1,5 mm²: 8,2 to 9,9 mm, 5 x 2,5 mm²: 11,0 to 13,3 mm; tests, Table 2: 2 kV a.c. for 5 min on the complete cable).

2 kodlama sistemi bu kodu tanıyor

DIN VDE tip adları (Almanya)

SembolAnlamı
NGerman national (VDE) type
YPVC insulation TI1 (DIN VDE 0281-1): 0,6 mm at 1,5 mm², 0,7 at 2,5, 0,8 at 4 and 6, 1,0 at 10 and 16, 1,2 at 25 and 35 mm² (DIN VDE 0250-204 Table 1)
MSheath of PVC TM1 (DIN VDE 0281-1), 1,4 to 1,8 mm, over a common covering that fills the gaps, 0,4 to 1,2 mm (a guide value; none on a single core) (DIN VDE 0250-204 5.6, 5.7, Table 1)
NYMNYM: PVC installation cable (Mantelleitung) for fixed installation, the type of DIN VDE 0250-204. U0/U 300/500 V (clause 4); laying after DIN VDE 0298-3 (clause 7). DIN VDE 0250-204:2000-12 (1 core 1,5 to 16 mm², 2 to 5 cores 1,5 to 35 mm², 7 cores 1,5 and 2,5 mm², 5.1; bare copper, solid class 1 to 10 mm², stranded class 2 from 16 mm², 5.2; mean overall diameter limits, Table 1 columns 7 and 8, e.g. 3 x 1,5 mm²: 8,2 to 9,9 mm, 5 x 2,5 mm²: 11,0 to 13,3 mm; tests, Table 2: 2 kV a.c. for 5 min on the complete cable)

DIN VDE 0250 kordonlar, kumanda ve özel kablolar (Almanya)

SembolAnlamı
NVDE Standardı
YPolivinilklorür (PVC); Kontrol Kablosu Anahtarında: Genel Olarak Termoplastikler
MKılıflı Tesisat Kablosu, Orta Mekanik Zorlanma (Mantelleitung, ör. NYM)
-JZTopraklama Damarlı (Yeşil/Sarı), Diğer Damarlar Siyah Üzeri Beyaz Numaralı

DIN VDE 0250 kordonlar, kumanda ve özel kablolar (Almanya) kablo kodu nasıl okunur

NYM kablosu nedir?

NYM: PVC installation cable (Mantelleitung) for fixed installation, the type of DIN VDE 0250-204. Anma değerleri: U0/U 300/500 V (clause 4); laying after DIN VDE 0298-3 (clause 7). Standart: DIN VDE 0250-204:2000-12 (1 core 1,5 to 16 mm², 2 to 5 cores 1,5 to 35 mm², 7 cores 1,5 and 2,5 mm², 5.1; bare copper, solid class 1 to 10 mm², stranded class 2 from 16 mm², 5.2; mean overall diameter limits, Table 1 columns 7 and 8, e.g. 3 x 1,5 mm²: 8,2 to 9,9 mm, 5 x 2,5 mm²: 11,0 to 13,3 mm; tests, Table 2: 2 kV a.c. for 5 min on the complete cable).

Okumaların alındığı belgeler ve sayfalar

  • DIN VDE 0250-204:2000-12 (clauses 3 to 7 p. 4 to 6, Table 1 and Table 2)

DIN VDE tip adları (Almanya): kablo tipi adları nasıl okunur

Yangın davranışı (AB CPR)

CPR sınıfını üretici Performans Beyanında beyan eder ve kılıfa basar (EN 50575 md. 7). Bu çözümleyici sınıf atamaz. CPR sınıfları ne anlama gelir →

Kaynaklar: EN 13501-6 taslağı ve FprEN 50575:2014 son taslağı (taslaklar, yayımlanmış metin değil); IEC 60332-3-24:2000+A1:2008; EN 13501-3 A2 taslağı.

NYM-JZ ile çalışın

Bu kabloyu kim üretiyor veya stokluyor?

Bu kablo ailesinin üreticileri ve stokçuları burada bölgeniz için sponsor olarak yer alır, her biri "Sponsorlu" diye işaretlenir; bir listeleme bu sayfanın kablo hakkında söylediklerini asla değiştirmez.

İlgili kablolar

Diğer DIN VDE tip adları (Almanya) kodları

NYM-JZ