NMD90 10/2 300 V
Nominal calculation, not one manufacturer's datasheet. The conductors are NEC Chapter 9 Table 8; the insulation, nylon and jacket walls and the bond are the values the makers print, because CSA C22.2 No. 48 was not read. Check the datasheet before you specify or order.
By NEC Table 8 and the makers' walls, NMD90 10/2 300 V comes to about 12.2 × 5.8 mm (width × thickness) and a weight of about 200 kg/km.
Open this cable in the designer Change any layer, see it in 3D and to scale, and download it.
This size as a PDF datasheet under your brand, with Pro. See Pro
Request a quote for this cable Sent to makers of this cable family, free.
Main dimensions
| Conductor | Copper 10 AWG (5.3 mm²), Ø 2.6 mm | NEC 2026 Chapter 9 Table 8: Class B concentric or solid diameter |
|---|---|---|
| Insulation | PVC 0.76 mm | NMD90 conductor PVC insulation: 30 mil to 10 AWG, 35 at 8, 45 at 6 to 2 (Nexans, Southwire; CSA C22.2 No. 48 not read) |
| Diameter over insulation | 4.1 mm | |
| Core diameter | 4.3 mm | |
| Width × thickness | 12.2 × 5.8 mm | |
| Weight (approximate) | 200 kg/km |
Layer by layer (inside out)
| # | Layer | Material | Thickness mm | Ø over mm | Source | How firmly |
|---|---|---|---|---|---|---|
| 1 | Insulation | PVC | 0.76 | 4.1 (on each core) | NMD90 conductor PVC insulation: 30 mil to 10 AWG, 35 at 8, 45 at 6 to 2 (Nexans, Southwire; CSA C22.2 No. 48 not read) | maker catalogue value, standard text not read |
| 2 | Nylon jacket (polyamide) | Nylon (PA) | 0.10 | 4.3 (on each core) | NMD90 conductor nylon jacket: 4 mil to 10 AWG, 5 at 8, 6 at 6 to 2 (Nexans; CSA C22.2 No. 48 not read) | maker catalogue value, standard text not read |
| 3 | Sheath | PVC | 0.76 | 5.8 | NMD90 PVC jacket: 30 mil to 10 AWG, 45 at 8 and 6, 60 at 4, 80 at 3 and 2 (Southwire SPEC 22050, Nexans) | maker catalogue value, standard text not read |
NMD90 is the Canadian nonmetallic-sheathed cable of CSA C22.2 No. 48, rated 300 V and 90 °C: copper conductors in PVC and nylon, thicker than in NM-B, a bare bond and a PVC jacket. Two conductors lie flat to 6 AWG with the bond between them; larger sizes and every three-conductor cable are round. Checked against Southwire (two editions) and Nexans Canada: research/designer-americas/nm-b.md in the site repository.
Materials in this cable: Copper, PVC
Weight, by part
| Conductors | 130 kg/km |
| Metal screens and armour | 0 kg/km |
| Insulation, semicon, tapes, fillers and sheaths | 70 kg/km |
| Total | 200 kg/km |
|---|
Each layer's cross-section times its density; stranded conductors, laid-up cores and helical wires count 2 % longer than the cable. Densities: copper 8.89 and aluminium 2.703 g/cm³ (the values of IEC 60028 and IEC 60889); XLPE 0.92, PE 0.94, PVC 1.45, semicon 1.12, steel 7.85 g/cm³ (usual compound values).